-- PSIM(FROM af-vmoa-0175.000.doc)
-- PSIM: The text in this section defines the MIB for the remote management of the CP-IWF
-- PSIM: function as defined in af-vmoa-0145.000. The MIB is specified in SMIv2 syntax.-- MIB for configuration, performance, and fault management of
-- the Loop Emulation Service (LES).
CPIWF-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,enterprises,Counter32,Integer32,NOTIFICATION-TYPEFROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF;-- --------------------------------------------------------------
--
-- The following OBJECT IDENTIFIER definition should be moved to
-- some other location, to conform with the statement in RFC 1442
-- that the MODULE-IDENTITY section must appear immediately after
-- any IMPORTs or EXPORTs statements.
--
-- However, some MIB utilities don't like MODULE-IDENTITY OIDs of
-- the form { enterprises atmForum(353) ... 1 }. Separate OBJECT
-- IDENTIFIER definitions appear to be more widely accepted - so,
-- in the interests of compatibility, it remains.
--
-- --------------------------------------------------------------
-- The object identifier subtree for ATM Forum Loop Emulation Service MIBsatmForum OBJECTIDENTIFIER::={ enterprises 353}atmForumNetworkManagement OBJECTIDENTIFIER::={ atmForum 5}atmfLoopEmulationService OBJECTIDENTIFIER::={ atmForumNetworkManagement 10}cpIwfMIB MODULE-IDENTITYLAST-UPDATED"200107260000Z"ORGANIZATION"ATM Forum VMOA Working Group"CONTACT-INFO"The ATM Forum
1000 Executive Parkway, Suite 200
St. Louis, MO 63141
United States of America
Tel: +1 314 205 0200
E-mail: info@atmforum.com"DESCRIPTION"This module defines a portion of the management information
base (MIB) for managing the LES CP-IWFs. It is meant to be
used in connection with MIB-II System Group and RFC 2863
which defines the ifTable."::={ atmfLoopEmulationService 1}cpIwfMIBObjects OBJECTIDENTIFIER::={ cpIwfMIB 1}cpIwfMIBNotifications OBJECTIDENTIFIER::={ cpIwfMIB 2}-- The cpIwfMIB Group-- Implementation of this group is mandatory for all
-- systems that implement the LES as defined in af-vmoa-0145.000-- The cpIwfMIB Group consists of the following:
-- cpIwf Group
-- cpIwfAal2Profile Group
-- cpIwf Pots Port Configuration Table
-- cpIwf ISDN-BRI Port Configuration Table
-- cpIwfAal2Stats Group
-- cpIwf Pots Port Statistics Table
-- cpIwf ISDN-BRI Port Statistics Table-- ---------------------------------------------------------------
--
-- cpIwf Group
--cpIwf OBJECTIDENTIFIER::={ cpIwfMIBObjects 1}
cpIwfVpi OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The VPI of the AAL2 VCC to which this CP-IWF is associated."::={ cpIwf 1}cpIwfVci OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The VCI of the AAL2 VCC to which this CP-IWF is associated."::={ cpIwf 2}cpIwfEchoCancellationSupport OBJECT-TYPESYNTAXINTEGER{no (1),yes (2)
}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Specifies whether or not the echo cancellation facility is
supported or not supported at the CP-IWF."::={ cpIwf 3}cpIwfNumPotsPorts OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of POTS user ports on the CP-IWF."::={ cpIwf 4}cpIwfNumIsdnBriPorts OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of ISDN-BRI user ports on the CP-IWF."
::={ cpIwf 5}cpIwfTimingReference OBJECT-TYPESYNTAXINTEGER{ntr(1),adaptiveVoice(2),freeRun(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"ntr - network timing reference, voice timing derived from
the local network interface.
adaptiveVoice - voice timing derived from incoming cell rate.
freeRun - voice timing derived from an internal free-running
timing source."::={ cpIwf 6}cpIwfPotsPortEncodingSelectionMode OBJECT-TYPESYNTAXINTEGER{
independent(1),masterSlave(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object controls the encoding switching for POTS user
ports.
masterSlave - the profile entry used by the CP-IWF is the same
as that selected by the CO-IWF.
independent - the CP-IWF can select the profile entry used for
transmission independently of the CO-IWF."DEFVAL{ masterSlave }::={ cpIwf 7}cpIwfIsdnBriPortEncodingSelectionMode OBJECT-TYPESYNTAXINTEGER{independent(1),
masterSlave(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object controls the encoding switching for ISDN BRI user
ports.
masterSlave - the profile entry used by the CP-IWF is the same
as that selected by the CO-IWF.
independent - the CP-IWF can select the profile entry used for
transmission independently of the CO-IWF."DEFVAL{ masterSlave }::={ cpIwf 8}cpIwfElcpAndPstnChannelBandwidth OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The approximate maximum bandwidth of the aal2 connection with CID=8
used to transport ELCP and PSTN signalling messages
specified in bits per second at the physical layer."
DEFVAL{64000}::={ cpIwf 9}cpIwfAdminStatus OBJECT-TYPESYNTAXINTEGER{up (1),down (2),shuttingDown (3),testing (4)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object is used to reflect the desired state of the CP-IWF. The
actual state of the CP-IWF is given by cpIwfOperStatus. When this
object is set to 'down', all existing calls on the CP-IWF are
cleared immediately. If this object is set to 'shuttingDown', no
further calls shall be accepted either incoming or outgoing on any
of the CP-IWF user ports. Once all the calls on the CP-IWF have
cleared gracefully the value of this object moves to 'down'."::={ cpIwf 10}cpIwfOperStatus OBJECT-TYPESYNTAXINTEGER{up (1),down (2),testing (3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Provides the current operational status of the CP-IWF function."::={ cpIwf 11}cpIwfRestart OBJECT-TYPESYNTAXINTEGER{
started (1),warmStart (2),coldStart (3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"May be used to initiate a re-start of the CP-IWF function. A Get
operation performed on this object will always return 'started'.
Re-start is initiated by performing a Set operation to either
'warmStart' or 'coldStart'.
A warmStart means initialising all state variables within the
CP-IWF to their starting values. A coldStart means rebooting
the software process that implements the CP-IWF function. It is
desirable that a coldStart should not affect the operation of other
functions within the LES device, including other CP-IWF instances."::={ cpIwf 12}cpIwfTestType OBJECT-TYPE
SYNTAXINTEGER{selfTest (1)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object is used to specify the type of test to run. The
result of the self test will be stored in cpIwfTestResult.
In order to run this test, the CO-IWF must first set the
value of this object to the test that needs to be carried out.
The CO-IWF must then set the cpIwfAdminStatus to 'testing'
which will activate the test. To de-activate a test that does
not self-terminate such as a loopback test, the CO-IWF must
set the cpIwfAdminStatus to a value other than 'testing'."::={ cpIwf 13}cpIwfTestResult OBJECT-TYPESYNTAXINTEGER{null (1),
success (2),failure (3),inProgress (4)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Provides the result of the last self-test operation performed on
the CP-IWF. If no self-test has been performed, this object
should return null (1)."::={ cpIwf 14}cpIwfTestResultText OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..64))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"Provides textual information about the result of the last self-test
operation performed on the CP-IWF, or a zero-length string if no
tests have been performed since the last reset."::={ cpIwf 15}cpIwfPlayoutBufferDepth OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The amount of packet delay variation to be accommodated on all
ports of the CP-IWF, in milliseconds."DEFVAL{20}::={ cpIwf 16}cpIwfImpairmentInterval OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The period over which voice impairments should be counted to
determine whether a threshold-crossing event has occurred, in
minutes. It is recommended that this value be set to an integral
multiple of 5 minutes."DEFVAL{15}::={ cpIwf 17}cpIwfImpairmentThreshold OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"If the number of impairment octets, calculated as the sum of
fillerOctets and droppedOctets, that is observed on any individual
POTS port or ISDN BRI port/channel during any interval of length
cpIwfImpairmentInterval minutes is equal to or greater than the
value of cpIwfImpairmentThreshold, then the trap
cpIwfExcessImpairment will be sent to the CO-IWF. A value of zero
will disable the reporting of excess impairments."DEFVAL{0}::={ cpIwf 18}
cpIwfV5PSTNProtocolVariant OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"When the applicationIdentifier indicates the use of PSTN
signalling for POTS the value of this object shall be set to the
national PSTN protocol variant to be used, else this object is not
applicable. The value of this object shall be the 2-digit country
code, as defined in the E.164 numbering plan, followed by an
optional carrier code. An SNMP Set operation to a value which is not
supported shall result in an SNMP Response with error status of
badValue(3)."DEFVAL{44}::={ cpIwf 19}cpIwfMwdForRestart OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-write
STATUScurrentDESCRIPTION"This object defines the maximum waiting delay (MWD) in seconds
used during restart. When this CP-IWF is powered on, it shall
initiate a restart timer to a random value, uniformly distributed
between 0 and the value of this object. Upon expiry of this timer
or when activity is detected this CP-IWF shall send a coldStart
Trap to its peer CO-IWF and initiate the restart procedure. The
CP-IWF shall guarantee that the first message that the CO-IWF
sees across the LES EOC after a restart of the CP-IWF is the
coldStart Trap."DEFVAL{600}::={ cpIwf 20}cpIwfEocBandwidth OBJECT-TYPESYNTAXINTEGER(300..640000)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Provides the approximate maximum bandwidth of the EOC in bits
per second at the physical layer."DEFVAL{32000}::={ cpIwf 21}cpIwfCurrentConfig OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object provides an efficient mechanism for a
management entity to maintain synchronization with
a CP-IWF current level of configuration. The value
should be persistently stored on the CP-IWF and hence
retain its previous value following a restart event.
The CP-IWF EMS is expected to retain a local copy of
this value. At any time (e.g., upon processing a cold
start trap), if the CP-IWF EMS detects a mismatch
between its copy and the value returned by CP-IWF, the
CP-IWF EMS may initiate configuration synchronization
operation with the CP-IWF and update this value. The
CP-IWF shall reset this value to zero, if the configuration
of the CP-IWF is changed by local management action or when
it determines that the hardware/software configuration that
affects the service capability of the CP-IWF has changed.
This only applies to configuration changes and not other
changeable objects such as statistics."DEFVAL{0}::={ cpIwf 22}cpIwfTrapGeneration OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled_all(2),disabled_except_coldStart(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Using this object, the CP-IWF EMS can globally disable all
trap generation by the CP-IWF. By default, the CP-IWF shall
be globally enabled to generate any/all traps that have not
otherwise been selectively disabled. To globally suppress
all trap generation by CP-IWF, CP-IWF EMS should set this
object to value: disabled_all(2)."DEFVAL{ enabled }::={ cpIwf 23}cpIwfVendorName OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..32))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The name of the vendor that produced the LES device in which
this CP-IWF function resides."::={ cpIwf 24}cpIwfDeviceType OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..32))
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor's designated model number for the LES device in which
this CP-IWF function resides."::={ cpIwf 25}cpIwfHardwareVersion OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..32))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor's designated hardware revision for the LES device
in which this CP-IWF function resides."::={ cpIwf 26}cpIwfSoftwareVersion OBJECT-TYPE
SYNTAXOCTETSTRING(SIZE(0..32))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor's designated software revision for the software that
implements the CP-IWF function."::={ cpIwf 27}-- ---------------------------------------------------------------
--
-- cpIwfAal2Profile Group
-- This group specifies AAL2 CPS and SSCS parameters of operation
-- for AAL2 connections terminated by a CP-IWF. These include
-- I.363.2 (CPS), I.366.1 (SSSAR SSCS), I.366.2 (trunking SSCS) and
-- LES specific CPS parameters. Some of these parameters are implied
-- and are not included in this MIB however their implied values are
-- as follows.
-- - aal2SscsSstedStatus 'selected',
-- - aal2SscsSsadtStatus 'notSelected',
-- - aal2SscsServiceCategory 'audio',
-- - aal2SscsAudioServiceTransport 'enabled',
-- - aal2SscsMfR1DigitPacketTransport n/a,
-- - aal2SscsMfR2DigitPacketTransport n/a,
-- - aal2SscsCircuitModeDataTransport n/a,
-- - aal2SscsCircuitModeDataNumChannels n/a,
-- - aal2SscsFrameModeDataTransport n/a,
-- - aal2SscsFrameModeDataMaxLength n/a,
-- - aal2SscsCasSignallingTransport 'inferred by the AppId'-- The CO-IWF is responsible for provisioning the AAL2 CPS and SSCS
-- parameters by setting appropriate values in this MIB. In the
-- absence of explicit provisioning of this group, the objects
-- in this group shall take the default values as specified.
--
-- Furthermore, these objects are read-write, however, it is possible
-- that certain AAL2 parameters may not be supported, e.g. an encoding
-- profile (aal2SscsPredefinedProfileIdentifier). In such cases an
-- attempt to set a value for an object that is not supported shall
-- result an SNMP response with an error status of badValue(3).cpIwfAal2Profile OBJECTIDENTIFIER::={ cpIwfMIBObjects 2}aal2ApplicationIdentifier OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This attribute describes the application identifier, which
describes the type of signaling used. The value of this object
should be one of those values given in the administered list of
AppIDs in section 5 of the ATM Forum document of well-known
addresses and assigned codes which can be located at
http://www.atmforum.com/pages/aboutatmtech/committees/
public_assigned_codes.txt"DEFVAL{ '0000000A'H }::={ cpIwfAal2Profile 1}aal2CpsMaxMultiplexedChannels OBJECT-TYPESYNTAXINTEGER(1..255)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Maximum number of multiplexed channels."DEFVAL{255}::={ cpIwfAal2Profile 2}aal2CpsMaxSDULength OBJECT-TYPE
SYNTAXINTEGER(45 | 64)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Maximum CPS-SDU size given in octets."DEFVAL{45}::={ cpIwfAal2Profile 3}aal2CpsCIDLowerLimit OBJECT-TYPESYNTAXINTEGER(16..223)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The minimum value the CID can take for AAL2 bearer channels and
ISDN D-channels."DEFVAL{16}::={ cpIwfAal2Profile 4}aal2CpsCIDUpperLimit OBJECT-TYPESYNTAXINTEGER(16..223)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The maximum value the CID can take for AAL2 bearer channels and
ISDN D-channels."DEFVAL{223}::={ cpIwfAal2Profile 5}aal2CpsOptimisation OBJECT-TYPESYNTAXINTEGER{singleCpsPacketPerCpsPduNoOverlap(1),multipleCpsPacketsPerCpsPduWithOverlap(2)}MAX-ACCESSread-write
STATUScurrentDESCRIPTION"This object refers to the mode of operation of the CPS on the
CP-IWF. The value of this object imposes a restriction on the CPS
SDU length and hence must override the value of
aal2CpsMaxSDULength.
singleCpsPacketPerCpsPduNoOverlap - A single CPS Packet is
contained within a CPS PDU and no overlap can occur into the next
CPS PDU. If this option is selected, then Timer_CU is not
applicable. Also the AAL2 payload size must be less than or equal
to 44 octets.
multipleCpsPacketsPerCpsPduWithOverlap - Multiple CPS Packets are
contained within a CPS PDU and overlap can occur into the next CPS
PDU. If this option is selected, then Timer_CU is applicable. Also
Max CPS SDU size must be less than or equal to 64."DEFVAL{ singleCpsPacketPerCpsPduNoOverlap }::={ cpIwfAal2Profile 6}aal2CpsTimerCuValue OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-write
STATUScurrentDESCRIPTION"This parameter specifies value of the Timer_CU, in msec, for this
VCC. This parameter has meaning only if the value of the parameter
aal2CpsOptimisation is set to multipleCpsPacketperCpsPduWithOverlap.
Although no default value is provided for this parameter, a value
must be assigned to the parameter during the startup of the
CP-IWF."DEFVAL{0}::={ cpIwfAal2Profile 7}aal2SscsFaxDemodulationTransport OBJECT-TYPESYNTAXINTEGER{disabled(1),enabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This specifies whether fax demodulation is enabled or disabled.
An SNMP Set to enable(2) when fax demodulation is not supported
must result in an SNMP response with error status of badValue(3)."DEFVAL{ disabled }::={ cpIwfAal2Profile 8}aal2SscsDtmfDigitPacketTransport OBJECT-TYPESYNTAXINTEGER{disabled(1),enabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This attribute describes whether DTMF digit packet transport is
enabled or disabled. If the parameter value specifies 'enabled',
then type 3 dialled digit packets are only passed if the encoding
scheme being used cannot transparently pass DTMF tones. If the
parameter value specifies 'disabled', then a higher rate encoding
scheme should be used to transparently pass DTMF tones."DEFVAL{ disabled }::={ cpIwfAal2Profile 9}aal2SscsPcmEncoding OBJECT-TYPESYNTAXINTEGER{aLaw (1),uLaw (2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This attribute describes the type of PCM encoding used."DEFVAL{ aLaw }::={ cpIwfAal2Profile 10}aal2SscsMaxSssarSduLength OBJECT-TYPESYNTAXINTEGER(493..65568)
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This is the maximum size an SSSAR-SDU can take as defined in
I.366.1. This parameter only applies to those AAL2 channels using
I.366.1 SSSAR."DEFVAL{1500}::={ cpIwfAal2Profile 11}aal2SscsProfileSource OBJECT-TYPESYNTAXINTEGER{ituT (1),other (2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This attribute describes the source of the profile source. An
SNMP Set on this object to an unsupported profile source must
result in an SNMP Response with error status of badValue(3)."DEFVAL{ other }::={ cpIwfAal2Profile 12}aal2SscsPredefinedProfileIdentifier OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This attribute describes the predefined profile identifier. An
SNMP Set on this object to an unsupported profile must
result in an SNMP Response with error status of badValue(3)."DEFVAL{9}::={ cpIwfAal2Profile 13}aal2SscsIeeeOui OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"This attribute contains the IEEE Organizationally Unique
Identifier (OUI) of the entity that specified the profile
being used, if other than ITU-T. For example, if the source
is the ATM Forum, the value of this object is 00A03E. This
attribute is only meaningful if aal2SccsProfileSource
has the value 'other'. An SNMP Set on this object to an
unsupported profile source must result in an SNMP Response with
error status of badValue(3)."DEFVAL{ '00A03E'h }::={ cpIwfAal2Profile 14}aal2SscsSsSarAssemblyTimerValue OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object specifies the value of the segmentation reassembly
timer, in msec, for I.366.1 SAR. The default value
specified for this timer is effectively an infinite value per
I.366.1."
DEFVAL{2147483647}::={ cpIwfAal2Profile 15}-- ---------------------------------------------------------------
--
-- cpIwfPotsPortTable
--cpIwfPotsPortTable OBJECT-TYPESYNTAXSEQUENCEOF CpIwfPotsPortEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains information on the configuration of the
POTS ports on the CP-IWF in addition to the information
contained in the ifTable about the physical interfaces to which
the CP-IWF POTS ports are peering with currently."::={ cpIwfMIBObjects 3}cpIwfPotsPortEntry OBJECT-TYPESYNTAX CpIwfPotsPortEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"An entry in the cpIwfPotsPortTable that represents a single
POTS port."INDEX{ potsPortNumber }::={ cpIwfPotsPortTable 1}
CpIwfPotsPortEntry ::=SEQUENCE{
potsPortNumber Integer32,
potsPhysicalPort Integer32,
aal2ChannelId INTEGER,
potsPortTestType INTEGER,
signalingMethod INTEGER,
potsPortLabel OCTETSTRING}potsPortNumber OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION
"The number identifying the POTS user port on the CP-IWF."::={ cpIwfPotsPortEntry 1}potsPhysicalPort OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This has the value of the ifIndex of the ifEntry of the physical
POTS port to which this CP-IWF POTS port is connected. The value
of (0) has the special meaning that this POTS port is not connected
to any physical port on the LES device."::={ cpIwfPotsPortEntry 2}aal2ChannelId OBJECT-TYPESYNTAXINTEGER(16..255)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION
"The CID of the AAL2 connection transporting this port's traffic
over the AAL2 VCC.
When the aal2ApplicationIdentifier indicates the presence of ELCP,
this object should not be used for CID allocation and the value of
this object is not applicable. In addition, if an SNMP operation
is attempted on this object, an SNMP response with error status of
badValue (3) should be returned."::={ cpIwfPotsPortEntry 3}potsPortTestType OBJECT-TYPESYNTAXINTEGER{none (1),codecLoopback (2),aal2Loopback (3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object is used to specify the type of test to run for
POTS ports. There are no results stored locally for a loopback
test. The tests involve looping back the media stream at either
the codec (PCM loopback) or the AAL2 layer (CPS loopback).
In order to run these tests, the CO-IWF must first set the value of
this object appropriate to the test that needs to be run. The CO-IWF
should then set the value of ifAdminStatus in the corresponding
ifEntry to 'testing'.
The CO-IWF should verify that the test is in progress by checking
that the value of ifOperStatus in the corresponding ifEntry is
equal to 'testing'. Once testing is complete the CO-IWF must set
the ifAdminStatus to a value other than 'testing'.
Note that the LES device must not allow a CO-IWF to manipulate
the ifAdminStatus of physical user ports that do not belong to
its managed CP-IWF."::={ cpIwfPotsPortEntry 4}signalingMethod OBJECT-TYPESYNTAXINTEGER{loopStart (1),loopReverseBattery (2),
groundStart (3),ddiPbxStart (4)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The signalling method to use for this user port."DEFVAL{ loopStart }::={ cpIwfPotsPortEntry 5}potsPortLabel OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Label assigned by service provider to identify this CP-IWF port.
For example, may be used to hold Directory Number."::={ cpIwfPotsPortEntry 6}-- ---------------------------------------------------------------
--
-- cpIwfIsdnBriPortTable
--cpIwfIsdnBriPortTable OBJECT-TYPESYNTAXSEQUENCEOF CpIwfIsdnBriPortEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains information on the configuration of the
ISDN BRI ports on the CP-IWF in addition to the information
contained in the ifTable about the physical interfaces to which
the CP-IWF ports are peering with currently."::={ cpIwfMIBObjects 4}cpIwfIsdnBriPortEntry OBJECT-TYPESYNTAX CpIwfIsdnBriPortEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"An entry in the cpIwfIsdnBriPortTable that represents a single
ISDN BRI port."INDEX{ isdnBriPortNumber }::={ cpIwfIsdnBriPortTable 1}
CpIwfIsdnBriPortEntry ::=SEQUENCE{
isdnBriPortNumber Integer32,
isdnBriPhysicalPort Integer32,
aal2ChannelIdD INTEGER,
aal2ChannelIdB1 INTEGER,
aal2ChannelIdB2 INTEGER,
isdnBriPortLabel OCTETSTRING,
isdnBriPortTestType INTEGER}isdnBriPortNumber OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION" The number identifying the ISDN BRI user port on the CP-IWF."::={ cpIwfIsdnBriPortEntry 1}isdnBriPhysicalPort OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This has the value of the ifIndex of the ifEntry of the physical
ISDN BRI port to which this CP-IWF ISDN BRI port is connected. The
value of (0) has the special meaning that this ISDN BRI port is
not connected to any physical port on the LES device."::={ cpIwfIsdnBriPortEntry 2}aal2ChannelIdD OBJECT-TYPESYNTAXINTEGER(16..255)MAX-ACCESSread-write
STATUScurrentDESCRIPTION"The CID of the AAL2 connection transporting the D channel of this
ISDN BRI port over the AAL2 VCC. The default value of this object is
determined by the formula defined in af-vmoa-0145.000 section 4.4.2.
When the aal2ApplicationIdentifier indicates the presence of ELCP,
this object should not be used for CID allocation and the value of
this object is not applicable. In addition, if an SNMP operation
is attempted on this object, an SNMP response with error status of
badValue (3) should be returned."::={ cpIwfIsdnBriPortEntry 3}aal2ChannelIdB1 OBJECT-TYPESYNTAXINTEGER(16..255)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The CID of the AAL2 connection transporting the B1 channel of this
ISDN BRI port over the AAL2 VCC. The default value of this object is
determined by the formula defined in af-vmoa-0145.000 section 4.4.2.
When the aal2ApplicationIdentifier indicates the presence of ELCP,
this object should not be used for CID allocation and the value of
this object is not applicable. In addition, if an SNMP operation
is attempted on this object, an SNMP response with error status of
badValue (3) should be returned."::={ cpIwfIsdnBriPortEntry 4}aal2ChannelIdB2 OBJECT-TYPESYNTAXINTEGER(16..255)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The CID of the AAL2 connection transporting the B2 channel of this
ISDN BRI port over the AAL2 VCC. The default value of this object is
determined by the formula defined in af-vmoa-0145.000 section 4.4.2.
When the aal2ApplicationIdentifier indicates the presence of ELCP,
this object should not be used for CID allocation and the value
this object is not applicable. In addition, if an SNMP operation
is attempted on this object, an SNMP response with error status of
badValue (3) should be returned."::={ cpIwfIsdnBriPortEntry 5}isdnBriPortLabel OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Label assigned by service provider to identify this CP-IWF port.
For example, may be used to hold Directory Number."::={ cpIwfIsdnBriPortEntry 6}isdnBriPortTestType OBJECT-TYPESYNTAXINTEGER{physicalPortLoopback (1),
dChannelPhysicalPortLoopback (2),b1ChannelPhysicalPortLoopback (3),b2ChannelPhysicalPortLoopback (4),dChannelAal2Loopback (5),b1ChannelAal2Loopback (6),b2ChannelAal2Loopback (7)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object is used to specify the type of test to run for
ISDN-BRI ports. There are no results stored locally for a
loopback test. Loopback of the whole ISDN-BRI physical user
port is supported where all the D, B1 and B2 channels are
looped back simultaneously, along with individual loopback
of the D, B1 and B2 channels. AAL2 Loopback is also supported
on a per sub-channel basis. In order to run these tests, the
CO-IWF must first set the value of this object appropriate to
the test that needs to be run. The CO-IWF should then set the
value of ifAdminStatus in the corresponding ifEntry to 'testing'.
The CO-IWF should verify that the test is in progress by checking
that the value of ifOperStatus in the corresponding ifEntry is
equal to 'testing'. Once testing is complete the CO-IWF must set
the ifAdminStatus to a value other than 'testing'.
Note that the LES device must not allow a CO-IWF to manipulate
the ifAdminStatus of physical user ports that do not belong to
its managed CP-IWF."::={ cpIwfIsdnBriPortEntry 7}-- ---------------------------------------------------------------
--
-- cpIwfAal2Stats Group
--cpIwfAal2Stats OBJECTIDENTIFIER::={ cpIwfMIBObjects 6}aal2CpsInPkts OBJECT-TYPESYNTAXCounter32
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of CPS packets received"::={ cpIwfAal2Stats 1}aal2CpsOutPkts OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of CPS packets transmitted"::={ cpIwfAal2Stats 2}aal2CpsParityErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 6/I.363.2
(errnum = 0)"::={ cpIwfAal2Stats 3}
aal2CpsSeqNumErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 6/I.363.2
(errnum = 1)"::={ cpIwfAal2Stats 4}aal2CpsOsfMismatchErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 6/I.363.2
(errnum = 2)"::={ cpIwfAal2Stats 5}aal2CpsOsfErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 6/I.363.2
(errnum = 3)"::={ cpIwfAal2Stats 6}aal2CpsHecErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 6/I.363.2
(errnum = 4)"::={ cpIwfAal2Stats 7}aal2CpsOversizedSduErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 6/I.363.2
(errnum = 5)"::={ cpIwfAal2Stats 8}
aal2CpsReassemblyErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 6/I.363.2
(errnum = 6)"::={ cpIwfAal2Stats 9}aal2CpsHecOverlapErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 6/I.363.2
(errnum = 7)"::={ cpIwfAal2Stats 10}aal2CpsUuiErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 6/I.363.2
(errnum = 8)"::={ cpIwfAal2Stats 11}aal2CpsCidErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 6/I.363.2
(errnum = 9)"::={ cpIwfAal2Stats 12}aal2SscsOversizedSssarSduErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 3/I.366.1
(errnum = 10)"
::={ cpIwfAal2Stats 13}aal2SscsSssarRasTimerExpiryErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 3/I.366.1
(errnum = 11)"::={ cpIwfAal2Stats 14}aal2SscsUndersizedSstedPduErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 5/I.366.1
(errnum = 20)"::={ cpIwfAal2Stats 15}aal2SscsSstedPduLengthMismatchErrors OBJECT-TYPESYNTAXCounter32
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 5/I.366.1
(errnum = 21)"::={ cpIwfAal2Stats 16}aal2SscsSstedCrcMismatchErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of errors encountered as specified in Table 5/I.366.1
(errnum = 22)"::={ cpIwfAal2Stats 17}-- ---------------------------------------------------------------
--
-- cpIwfPotsPortStatsTable
--cpIwfPotsPortStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CpIwfPotsPortStatsEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"This table contains performance statistics pertinent to POTS
ports respectively in addition to the information contained in the
ifTable about the physical interfaces to which the CP-IWF ports
are peering with currently"::={ cpIwfMIBObjects 7}cpIwfPotsPortStatsEntry OBJECT-TYPESYNTAX CpIwfPotsPortStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the cpIwfPotsPortStatsTable that represents
statistics for a single POTS port."INDEX{ potsPortNumber }::={ cpIwfPotsPortStatsTable 1}
CpIwfPotsPortStatsEntry ::=SEQUENCE{
cpIwfPotsPortActiveSeconds Counter32,
cpIwfPotsPortFillerOctets Counter32,
cpIwfPotsPortDroppedOctets Counter32}cpIwfPotsPortActiveSeconds OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total length of time the AAL2 channel associated with this port
has been active, in seconds."::={ cpIwfPotsPortStatsEntry 1}cpIwfPotsPortFillerOctets OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total number of PCM filler octets injected into active media
stream on this port due to playout buffer underflow."::={ cpIwfPotsPortStatsEntry 2}
cpIwfPotsPortDroppedOctets OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total number of PCM payload octets dropped due to buffer overflow
at this port. Octets that are dropped because they arrived late,
and which have already been substituted by filler PCM octets,
shall not be counted."::={ cpIwfPotsPortStatsEntry 3}-- ---------------------------------------------------------------
--
-- cpIwfIsdnBriPortStatsTable
--cpIwfIsdnBriPortStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CpIwfIsdnBriPortStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains performance statistics pertinent to ISDN BRI
ports respectively in addition to the information contained in the
ifTable about the physical interfaces to which the CP-IWF ports
are peering with currently"::={ cpIwfMIBObjects 8}cpIwfIsdnBriPortStatsEntry OBJECT-TYPESYNTAX CpIwfIsdnBriPortStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the cpIwfIsdnBriPortStatsTable that represents
statistics for a single ISDN BRI port."INDEX{ isdnBriPortNumber }::={ cpIwfIsdnBriPortStatsTable 1}
CpIwfIsdnBriPortStatsEntry ::=SEQUENCE{
cpIwfIsdnBriPortB1ActiveSeconds Counter32,
cpIwfIsdnBriPortB1FillerOctets Counter32,
cpIwfIsdnBriPortB1DroppedOctets Counter32,
cpIwfIsdnBriPortB2ActiveSeconds Counter32,
cpIwfIsdnBriPortB2FillerOctets Counter32,
cpIwfIsdnBriPortB2DroppedOctets Counter32}cpIwfIsdnBriPortB1ActiveSeconds OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total length of time the AAL2 channel associated with this
port/channel has been active, in seconds."::={ cpIwfIsdnBriPortStatsEntry 1}cpIwfIsdnBriPortB1FillerOctets OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total number of PCM filler octets injected into active media
stream on this port/channel due to playout buffer underflow."
::={ cpIwfIsdnBriPortStatsEntry 2}cpIwfIsdnBriPortB1DroppedOctets OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total number of PCM payload octets dropped due to buffer overflow
on this port/channel. Octets that are dropped because they
arrived late, and which have already been substituted by filler
PCM octets, shall not be counted."::={ cpIwfIsdnBriPortStatsEntry 3}cpIwfIsdnBriPortB2ActiveSeconds OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total length of time the AAL2 channel associated with this
port/channel has been active, in seconds."::={ cpIwfIsdnBriPortStatsEntry 4}
cpIwfIsdnBriPortB2FillerOctets OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total number of PCM filler octets injected into active media
stream on this port/channel due to playout buffer underflow."::={ cpIwfIsdnBriPortStatsEntry 5}cpIwfIsdnBriPortB2DroppedOctets OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total number of PCM payload octets dropped due to buffer overflow
on this port/channel. Octets that are dropped because they
arrived late, and which have already been substituted by filler
PCM octets, shall not be counted."::={ cpIwfIsdnBriPortStatsEntry 6}
-- ---------------------------------------------------------------
-- The following section defines Loop Emulation Service specific
-- traps for the CP-IWF as a whole (not port specific).
--
-- CP-IWF enterprise traps group
--cpIwfMIBNotificationPrefix OBJECTIDENTIFIER::={ cpIwfMIBNotifications 0}cpIwfInsufficientPhysicalBandwidth NOTIFICATION-TYPEOBJECTS{ cpIwfUpstreamPhysicalBandwidth,
cpIwfDownstreamPhysicalBandwidth }STATUScurrentDESCRIPTION"This trap is generated when the physical layer bandwidth in either
direction drops below the currently configured AAL2 VCC bandwidth."::={ cpIwfMIBNotificationPrefix 1}cpIwfUpstreamPhysicalBandwidth OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-create
STATUScurrentDESCRIPTION"This object defines the new physical bandwidth in the upstream
direction of the CP-IWF."::={ cpIwfMIBObjects 9}cpIwfDownstreamPhysicalBandwidth OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object defines the new physical bandwidth in the downstream
direction of the CP-IWF."::={ cpIwfMIBObjects 10}cpIwfExcessImpairment NOTIFICATION-TYPEOBJECTS{ cpIwfImpairmentPortType, cpIwfPortNumber }STATUScurrentDESCRIPTION"This trap is generated when the number of impairments on any POTS
port or ISDN BRI port/channel, measured as the sum of fillerOctets
and droppedOctets on that port, in any given interval of
cpIwfImpairmentInterval minutes, is equal to or greater than the
value of cpIwfImpairmentThreshold. If the value of
cpIwfImpairmentThreshold is zero, then this trap is never
generated."::={ cpIwfMIBNotificationPrefix 2}cpIwfImpairmentPortType OBJECT-TYPESYNTAXINTEGER{pots (1),isdnBriB1 (2),isdnBriB2 (3)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used within the cpIwfExcessImpairment Trap and
identifies the type of the CP-IWF port on which the excess
impairments event occurred."::={ cpIwfMIBObjects 11}cpIwfPortNumber OBJECT-TYPESYNTAXINTEGER(1..240)MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used within traps to identify the port number to
which the trap refers. The range of values this object can take is
dependent on port type and is defined in af-vmoa-0145.000 section
4.4.2"::={ cpIwfMIBObjects 12}-- ---------------------------------------------------------------
--
-- Conformance informationcpIwfMIBConformance OBJECTIDENTIFIER::={ cpIwfMIB 3}cpIwfMIBCompliances OBJECTIDENTIFIER::={ cpIwfMIBConformance 1}
cpIwfMIBGroups OBJECTIDENTIFIER::={ cpIwfMIBConformance 2}-- compliance statementscpIwfMIBCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for SNMP entities that support LES as
specified in af-vmoa-0145.000 of the ATM Forum.
Note the Trap types and associated MIB objects defined in this MIB
are required implementations to claim conformance to this MIB.
For a host to conform to this MIB it must also implement:
- The System Group from RFC 1213
- ifTable and ifXTable from RFC 2863. See section 6 of this
specification for interpretations of the ifTable and
ifXTable objects as they apply to LES."MODULE-- this moduleMANDATORY-GROUPS{
cpIwfGeneralGroup,
cpIwfNotificationsGroup
}GROUP cpIwfAal2ConfigGroup
DESCRIPTION"This group is mandatory only for those CP-IWFs that use PVCs
between the CP-IWF and CO-IWF. It is not required in the presence of
SVCs as all AAL2 parameters shall be supplied during SVC setup."GROUP cpIwfAal2StatsGroup
DESCRIPTION"This group is mandatory only for those CP-IWFs that provide AAL2
statistics."GROUP cpIwfPotsPortConfigGroup
DESCRIPTION"This group is mandatory only for those CP-IWFs
that host POTS services."GROUP cpIwfPotsPortStatsGroup
DESCRIPTION"This group is mandatory only if the CP-IWF provides statistics for
any POTS ports it hosts."GROUP cpIwfIsdnBriPortConfigGroup
DESCRIPTION"This group is mandatory only for those CP-IWFs
that host ISDN BRI services."GROUP cpIwfIsdnBriPortStatsGroup
DESCRIPTION"This group is mandatory only if the CP-IWF provides statistics for
any ISDN BRI ports it hosts."GROUP cpIwfPotsPortCidConfigGroup
DESCRIPTION"This group is mandatory for CP-IWFs that host POTS services, only
in the absence of ELCP as a mechanism for CID allocation."GROUP cpIwfIsdnBriPortCidConfigGroup
DESCRIPTION"This group is mandatory for CP-IWFs that host ISDN BRI services,
only in the absence of ELCP as a mechanism for CID allocation."GROUP cpIwfElcpPstnGroup
DESCRIPTION"This group is mandatory for those CP-IWFs that implement either
the CCS signaling option or the ELCP."GROUP cpIwfPlayoutBufferGroup
DESCRIPTION"This group is mandatory only for those CP-IWFs that make the
playout buffer depth configurable and provide a means to detect
impairments."GROUP cpIwfImpairmentNotificationsGroup
DESCRIPTION"This group is mandatory if the cpIwfPlayoutBufferGroup is
implemented."::={ cpIwfMIBCompliances 1}-- Units of ConformancecpIwfGeneralGroup OBJECT-GROUPOBJECTS{
cpIwfVpi,
cpIwfVci,
cpIwfTimingReference,
cpIwfEchoCancellationSupport,
cpIwfAdminStatus,
cpIwfOperStatus,
cpIwfRestart,
cpIwfTestType,
cpIwfTestResult,
cpIwfTestResultText,
cpIwfMwdForRestart,
cpIwfEocBandwidth,
cpIwfCurrentConfig,
cpIwfTrapGeneration,
cpIwfVendorName,
cpIwfDeviceType,
cpIwfHardwareVersion,
cpIwfSoftwareVersion,
cpIwfUpstreamPhysicalBandwidth,
cpIwfDownstreamPhysicalBandwidth,
cpIwfPortNumber
}STATUScurrentDESCRIPTION"A collection of objects required to manage the
CP-IWF as a whole"::={ cpIwfMIBGroups 1}cpIwfAal2ConfigGroup OBJECT-GROUPOBJECTS{
aal2ApplicationIdentifier,
aal2CpsMaxMultiplexedChannels,
aal2CpsMaxSDULength,
aal2CpsCIDLowerLimit,
aal2CpsCIDUpperLimit,
aal2CpsOptimisation,
aal2CpsTimerCuValue,
aal2SscsMaxSssarSduLength,
aal2SscsFaxDemodulationTransport,
aal2SscsDtmfDigitPacketTransport,
aal2SscsPcmEncoding,
aal2SscsProfileSource,
aal2SscsPredefinedProfileIdentifier,
aal2SscsIeeeOui,
aal2SscsSsSarAssemblyTimerValue
}STATUScurrentDESCRIPTION"A collection of objects describing the configuration of the AAL2
layer specific to LES"::={ cpIwfMIBGroups 2}cpIwfPotsPortConfigGroup OBJECT-GROUPOBJECTS{
cpIwfNumPotsPorts,
cpIwfPotsPortEncodingSelectionMode,
potsPhysicalPort,
potsPortTestType,
signalingMethod,
potsPortLabel
}STATUScurrentDESCRIPTION"A collection of objects describing the configuration of the POTS
ports on a CP-IWF."::={ cpIwfMIBGroups 3}
cpIwfIsdnBriPortConfigGroup OBJECT-GROUPOBJECTS{
cpIwfNumIsdnBriPorts,
cpIwfIsdnBriPortEncodingSelectionMode,
isdnBriPhysicalPort,
isdnBriPortLabel,
isdnBriPortTestType
}STATUScurrentDESCRIPTION"A collection of objects describing the configuration of the ISDN
BRI ports on a CP-IWF."::={ cpIwfMIBGroups 4}cpIwfPotsPortCidConfigGroup OBJECT-GROUPOBJECTS{
aal2ChannelId
}STATUScurrentDESCRIPTION"Object describing the static CID allocation to a
user-side POTS termination. This object is required
when ELCP is not used as a mechanism for CID allocation."::={ cpIwfMIBGroups 5}
cpIwfIsdnBriPortCidConfigGroup OBJECT-GROUPOBJECTS{
aal2ChannelIdD,
aal2ChannelIdB1,
aal2ChannelIdB2
}STATUScurrentDESCRIPTION"A collection of objects describing the static CID
allocations to the D, B1 and B2 channels of a user-side
ISDN-BRI termination. These objects are required when
ELCP is not used as a mechanism for CID allocation."::={ cpIwfMIBGroups 6}cpIwfAal2StatsGroup OBJECT-GROUPOBJECTS{
aal2CpsInPkts,
aal2CpsOutPkts,
aal2CpsParityErrors,
aal2CpsSeqNumErrors,
aal2CpsOsfMismatchErrors,
aal2CpsOsfErrors,
aal2CpsHecOverlapErrors,
aal2CpsHecErrors,
aal2CpsOversizedSduErrors,
aal2CpsReassemblyErrors,
aal2CpsUuiErrors,
aal2CpsCidErrors,
aal2SscsOversizedSssarSduErrors,
aal2SscsSssarRasTimerExpiryErrors,
aal2SscsUndersizedSstedPduErrors,
aal2SscsSstedPduLengthMismatchErrors,
aal2SscsSstedCrcMismatchErrors
}STATUScurrentDESCRIPTION"These objects provide statistics on the AAL2 layer"::={ cpIwfMIBGroups 7}cpIwfPotsPortStatsGroup OBJECT-GROUPOBJECTS{
cpIwfPotsPortActiveSeconds,
cpIwfPotsPortFillerOctets,
cpIwfPotsPortDroppedOctets
}STATUScurrentDESCRIPTION"These objects provide statistics on the POTS ports"
::={ cpIwfMIBGroups 8}cpIwfIsdnBriPortStatsGroup OBJECT-GROUPOBJECTS{
cpIwfIsdnBriPortB1ActiveSeconds,
cpIwfIsdnBriPortB1FillerOctets,
cpIwfIsdnBriPortB1DroppedOctets,
cpIwfIsdnBriPortB2ActiveSeconds,
cpIwfIsdnBriPortB2FillerOctets,
cpIwfIsdnBriPortB2DroppedOctets
}STATUScurrentDESCRIPTION"These objects provide statistics on the ISDN BRI ports"::={ cpIwfMIBGroups 9}cpIwfElcpPstnGroup OBJECT-GROUPOBJECTS{
cpIwfV5PSTNProtocolVariant,
cpIwfElcpAndPstnChannelBandwidth
}STATUScurrentDESCRIPTION
"Objects for setting the V5 PSTN protocol variant and the
maximum bandwidth to be used for transmission of PSTN or
ELCP messages."::={ cpIwfMIBGroups 10}cpIwfPlayoutBufferGroup OBJECT-GROUPOBJECTS{
cpIwfPlayoutBufferDepth,
cpIwfImpairmentInterval,
cpIwfImpairmentThreshold,
cpIwfImpairmentPortType
}STATUScurrentDESCRIPTION"A collection of objects used for configuring the playout
buffer depth and to detect impairments to do incorrect setting
of this buffer depth."::={ cpIwfMIBGroups 11}cpIwfNotificationsGroup NOTIFICATION-GROUPNOTIFICATIONS{ cpIwfInsufficientPhysicalBandwidth }STATUScurrent
DESCRIPTION"The notification(s) which a CP-IWF is required to implement"::={ cpIwfMIBGroups 12}cpIwfImpairmentNotificationsGroup NOTIFICATION-GROUPNOTIFICATIONS{ cpIwfExcessImpairment }STATUScurrentDESCRIPTION"This group specifies the notification used to inform the CO-IWF
of impairments due to incorrect playout buffer depth, or corruption
or loss of AAL2 packets by the network."::={ cpIwfMIBGroups 13}END